.jpg)
If you headed over to the crafting competition, So You Think You're Crafty, and voted a couple weeks ago, you recognize this picture! Thanks, by the way! I'm officially a part of Season 12 in So You Think You're Crafty!
Here's my attempt at sharing the tutorial. There are a few missing pictures here and there, but let me know if you have any questions!! While I did make this necklace for a bride to wear during her wedding, it's a great statement necklace that could be worn dressed up or down! I think it would be totally precious with a white tee, skinny jeans and heels(or most likely flats if you're me)!
.jpg)
The top left picture was the Cara Accessories Pearl and Crystal Necklace on The Ruffled Blog in a wedding shoot. The necklace was supposedly found at Nordstrom...not sure if they have it anymore). I'm pretty sure I have that same top left image pinned at least 5 times among my boards. Ha. The bottom left picture is just a clearer picture I found here of the same necklace. And, of course, the picture on the right his mine. As you can see, the original lays flat. Mine did not. It curled up and is more like a tube. While it wasn't exactly what I was going for, it was a pleasant surprise and I think it still turned out beautifully. Maybe next time I make it I'll attempt to find a way to do it differently so it will lay flatter. I may have jammed too many beads on there which caused it to roll...not sure!
.jpg)
With over 650 hand-wired beads, this necklace is definitely a statement piece. The base of the "bib" part is 8 strands of antiqued bronze chain. I just love the mix of the beads. I used different sized pearls, vintage glass stones, rhinestone clusters, seed beads, champagne colored drops and faceted beads as well as clear faceted beads all on antiqued brass.
Wanna make your own? Ok!
Materials:
Jewelry Tools (wire cutters, needle nose pliers, flat nose pliers, bent nose pliers)
Hundreds and Hundreds of Beads (around 700)
(I searched Etsy for some interesting vintage pieces to mix in with my usual mix from Michael's) : large, medium, and small pearls, clear faceted beads, champagne-colored faceted beads, tiny sead beads (pearl, clear, or champagne), anything you find interesting.
Antique Bronze Chain (at least 4 mm wide)- you could also use gold (like the original)
7 packs of 100 antique bronze flat head pins (again around 700)
3 large jump rings
lobster clasp and jump rings to connect the clasp
Bust
(or something you can pin the necklace to while you work)
Time :)
You should have a much larger pile of these beads with simple loops when you're done with the first step.
First, you create hundreds upon hundreds of these: simple loops above your beads.
To create a simple loop you need, (clockwise from left), wire cutters, needle nose pliers, bent nose pliers, your bead, and a flat head pin.
1. Place your bead on your pin 2. Bend the wire at a 90 degree angle over the bead. 3. Place your needle nose pliers above the angled wire and bend the wire over the needle nose as seen here and in step 4 below.
Next, create the 8 strand chain bib. To be totally honest, this took me awhile to get right. It needs to be perfect so that the chain lays together exactly side by side.
I was unsure how to cut the chain to the right lengths so I used the above method placing the sections of chain side by side and then just cutting them accordingly. It seems that each chain that sits "on top" of the chain below should be just a tiny bit shorter than the one below it. The actual amount of how much shorter will change depending on the width of your chain lengths. Mine was extra difficult to calculate sine I was using the Mother/Son (figaro) chain (large link and small links combined). The longest chain is about 10 inches long (give or take some depending on how long you want this portion of the necklace/how far down you want the necklace to lay on your chest). Each chain on my necklace was about 4 small links shorter than the one prior.
Once you have the chains cut to the lengths you think might work, add them to one of your large jump rings (sorry there isn't a picture for these steps) and then add the other sides of the chains to the other jump ring, making sure to add the chains in the correct order so they don't twist! Pin both jump rings to your bust (as pictured above even though the pins are behind the neck portion of the bust...sorry!) My chains still weren't exactly correct so I basically cut and added links to the chains until they laid correctly one directly on top/next to the other.
It's difficult to keep them straight and to tell which chain should lay there so I often (while assembling this part of the necklace and while attaching the beads) would lift each strand one by one of the necklace and let it fall so it would lay correctly. See picture above.
This part of your necklace is shorter than it appears above, as well. The ends of it where each jump ring is should hit at your collar bones. And as stated above, the longest chain (the one that sits on the bottom) should be around 8-10 inches long depending on how far down your chest you want it to hang. The remainder of the necklace (extending from your collar bones around your neck) is a single chain (as seen in the picture below), and we'll discuss how to assemble it later.
Another way is to attach the clusters to the chains in the same way. Usually when I make a cluster, I use a small jump ring, but when I tried that, I found that this was causing there to be too much space between the cluster and the chain. Instead, I made a cluster out of a simple loop that was already on the bead. Simply take your round nose pliers and stick one side of them into the loop and pull to pry it open. Slide on the beads you want into the loop and determine a spot for your cluster. I recommend starting from one side and working your way around to the other side (not like the picture below shows you!!) Place each bead or bead cluster directly under the one you just attached.
The above picture is simply showing you how to connect your chains as you put on the cluster. Use your bent nose pliers to hold the open loop with the other beads on it and slide two chains onto the loop (making sure those two chains are supposed to be next to each other!) and then use your flat nose pliers and bent nose pliers to close the loop again around the chain and all the other beads.
What the picture above is not showing you is that you need to place each bead or bead cluster extremely close to the last beads you attached. This picture shows how close they should be:
You will have to lift up beads to see the next closest place to attach new beads or bead clusters. No chain should be showing in between. Also you should work your way down the necklace from one side to the next as well as working across the width of it. As you go, make sure there are no parts of the necklace where the chains are not connected. If this happens, it creates a hole where attached beads can fall through and get trapped behind the bib instead of in front!
That's really it for the bib, except, just keep going. And going. And going. :)
Last, create the remaining portion of the necklace and attach the clasp.
For the next part, I didn't take any pictures because I was feverishly trying to finish it in time. Whew. But the above picture shows what this part of your necklace should look like. Create this part by cutting a 10 inch section of chain and cutting it in half again. Attach a chain to each side of the bib by opening up the large jump rings and sliding on the chain and closing them securely again. Attach a lobster clasp to one end of the chain on one side and the last large jump ring on the other side. This is your clasp. Then simply add small clusters of beads by opening up the simple loops of them and attaching them directly to the chain on both sides sporadically.
.jpg)
Wanna make your own? Ok!
Materials:
Jewelry Tools (wire cutters, needle nose pliers, flat nose pliers, bent nose pliers)
Hundreds and Hundreds of Beads (around 700)
(I searched Etsy for some interesting vintage pieces to mix in with my usual mix from Michael's) : large, medium, and small pearls, clear faceted beads, champagne-colored faceted beads, tiny sead beads (pearl, clear, or champagne), anything you find interesting.
Antique Bronze Chain (at least 4 mm wide)- you could also use gold (like the original)
7 packs of 100 antique bronze flat head pins (again around 700)
3 large jump rings
lobster clasp and jump rings to connect the clasp
Bust
(or something you can pin the necklace to while you work)
Time :)
First, you create hundreds upon hundreds of these: simple loops above your beads.
4. As explained in step 3, bend the wire around the needle nose. 5. Reposition your pliers so you can continue to wrap the wire around the needle nose so that the wire creates a circle. 7. Use your wire cutters to trim off the excess wire.
Make a ton of these!! This part is easy, but time-consuming!
I was unsure how to cut the chain to the right lengths so I used the above method placing the sections of chain side by side and then just cutting them accordingly. It seems that each chain that sits "on top" of the chain below should be just a tiny bit shorter than the one below it. The actual amount of how much shorter will change depending on the width of your chain lengths. Mine was extra difficult to calculate sine I was using the Mother/Son (figaro) chain (large link and small links combined). The longest chain is about 10 inches long (give or take some depending on how long you want this portion of the necklace/how far down you want the necklace to lay on your chest). Each chain on my necklace was about 4 small links shorter than the one prior.
Once you have the chains cut to the lengths you think might work, add them to one of your large jump rings (sorry there isn't a picture for these steps) and then add the other sides of the chains to the other jump ring, making sure to add the chains in the correct order so they don't twist! Pin both jump rings to your bust (as pictured above even though the pins are behind the neck portion of the bust...sorry!) My chains still weren't exactly correct so I basically cut and added links to the chains until they laid correctly one directly on top/next to the other.
This part of your necklace is shorter than it appears above, as well. The ends of it where each jump ring is should hit at your collar bones. And as stated above, the longest chain (the one that sits on the bottom) should be around 8-10 inches long depending on how far down your chest you want it to hang. The remainder of the necklace (extending from your collar bones around your neck) is a single chain (as seen in the picture below), and we'll discuss how to assemble it later.
Next, attach the beads on simple loops to the necklace (as seen in the picture above).
The whole idea of this necklace is that it is connected all the way around. So each bead you attach to the chain, you will actually be connecting two chains as you go...
Gather some good beads you want to go together. Attach large beads as individuals and small and medium beads as clusters. The clusters are used to fill large spaces and they help the beads stay close to each other so you can fit in more beads or bead clusters.You can make several types of clusters: a cluster with 4 or 5 small beads, a cluster with 1 medium bead and 3 small beads, a cluster with 3 medium beads, or whatever you think will work in that space you're working in.
Here's one way to attach the beads: Open up a simple loop with your round nose pliers, hold the wire with your bent nose pliers and slide on two chains connecting them and then use your flat nose and bent nose pliers to close the simple loop around the two chain links. Before connecting chains, be sure the two chains you're connecting are supposed to be next to each other. Remember, I did this by lifting the chains one by one and separating them so I could see which chains should go where.
Another way is to attach the clusters to the chains in the same way. Usually when I make a cluster, I use a small jump ring, but when I tried that, I found that this was causing there to be too much space between the cluster and the chain. Instead, I made a cluster out of a simple loop that was already on the bead. Simply take your round nose pliers and stick one side of them into the loop and pull to pry it open. Slide on the beads you want into the loop and determine a spot for your cluster. I recommend starting from one side and working your way around to the other side (not like the picture below shows you!!) Place each bead or bead cluster directly under the one you just attached.
What the picture above is not showing you is that you need to place each bead or bead cluster extremely close to the last beads you attached. This picture shows how close they should be:
You will have to lift up beads to see the next closest place to attach new beads or bead clusters. No chain should be showing in between. Also you should work your way down the necklace from one side to the next as well as working across the width of it. As you go, make sure there are no parts of the necklace where the chains are not connected. If this happens, it creates a hole where attached beads can fall through and get trapped behind the bib instead of in front!
And, done.
If you want to make this, and have any questions, please feel free to email me and ask me or leave it in the comments here. I will be more than happy to make any clarifications that may be needed! This was a long post with a few steps missing from pictures so I totally understand if you're lost!! ha.
I hope you enjoyed this tutorial!
I'll be sharing this post at the parties on my sidebar and Liz Marie Blog
If you want to make this, and have any questions, please feel free to email me and ask me or leave it in the comments here. I will be more than happy to make any clarifications that may be needed! This was a long post with a few steps missing from pictures so I totally understand if you're lost!! ha.
I hope you enjoyed this tutorial!
I'll be sharing this post at the parties on my sidebar and Liz Marie Blog
.jpg)
